P0218, P0219 and P0297: engine overspeed, vehicle overspeed and gearbox overheating

The engine turned faster than its allowed speed (P0219), the vehicle went faster than its set limit (P0297), or the gearbox fluid became too hot (P0218).

SeverityHighCarrying on can cause expensive damage, so deal with it now.

Can you keep driving?Only as far as the workshop

What does P0219 mean?

These codes record an event rather than a broken part. P0219 is stored when the engine overrevs, often after a missed downshift on a manual car or a slipping clutch; it can damage valves and pistons. P0297 is stored when the car exceeds a speed limit programmed for its tires or equipment, or because of a faulty speed signal. P0218 says the gearbox fluid overheated, usually from towing, climbing or slipping clutches, and heat is what wears an automatic gearbox fastest.

What causes P0219?

  1. A missed gear on a manual gearbox, sending the engine past its limit
  2. A slipping clutch or gearbox letting the engine race
  3. A faulty speed signal, for P0297
  4. Towing heavy loads or long climbs, for P0218
  5. Low or old gearbox fluid, or a blocked fluid cooler

What to check first for P0219

  • Think back to whether the engine revved hard, for example on a missed gear change
  • Check the gearbox fluid level and condition, for P0218
  • Have the engine checked for valve damage if a big overrev happened
  • Read the gearbox and speed sensor codes as well

Can you drive with P0219?

Usually you can drive to a workshop, gently. If the engine runs rough or makes a new noise after an overrev, or the gearbox slips or smells burnt, stop and have the car towed.

Clear a code only after the fault is fixed. A code that comes back means the cause is still there, and a warning light left on can hide a second fault behind the first.

Codes on this page

  • P0218Transmission Fluid Over Temperature Condition
  • P0219Engine Overspeed Condition
  • P0297Vehicle Overspeed Condition

Checked on · Rafael Soares

These are the generic meanings every manufacturer shares. Each brand adds its own detail, so your car's handbook, its service information and a qualified mechanic have the last word. OdoKeep has no connection with any manufacturer, and the app does not read codes from the car.

Write the code into the car's history

Log the code in OdoKeep as an OBD scan when a scanner or the workshop gives you one, then the repair and what it cost, and keep the maintenance that prevents it on a plan with reminders. The app keeps the record; it does not read the car.

QR code to download OdoKeep on the App Store or Google Play

Point your phone's camera here