P0660 to P0665: intake manifold tuning valve circuit

The control circuit of the valve that changes the length or path of the intake manifold, on bank 1 or bank 2, is open, low or high.

SeverityLowLittle risk to the car, but the fault stays until it is repaired.

Can you keep driving?Safe to drive, book a check

What does P0660 mean?

Many engines change the path the air takes through the intake manifold: a long path helps torque at low speed and a short one helps power at high speed. A valve or flaps, moved by a solenoid, a vacuum actuator or a small motor, switch between them. If the computer cannot drive the valve, it stays in one position, so the engine loses a little torque or a little top-end power, but runs normally otherwise.

What causes P0660?

  1. A failed tuning valve solenoid or actuator motor
  2. A split vacuum hose to the actuator, on vacuum-operated valves
  3. A damaged wire or connector at the valve
  4. Flaps stuck with carbon, or a broken linkage

What to check first for P0660

  • Inspect the valve's connector and wiring
  • Check the vacuum hose to the actuator, where there is one
  • Have the valve commanded with a scan tool and watch whether the linkage moves
  • Ask whether the engine has known issues with intake flaps breaking

Can you drive with P0660?

You can drive safely. Expect slightly less pulling power; have it checked at the next service, and sooner if you hear a rattle from the intake, because on some engines a broken flap can fall into the engine.

In states with an OBD-II emissions inspection, a car with the check engine light on fails the test until the fault is fixed.

Codes on this page

  • P0660Intake Manifold Tuning Valve Control Circuit/OpenBank 1
  • P0661Intake Manifold Tuning Valve Control Circuit LowBank 1
  • P0662Intake Manifold Tuning Valve Control Circuit HighBank 1
  • P0663Intake Manifold Tuning Valve Control Circuit/OpenBank 2
  • P0664Intake Manifold Tuning Valve Control Circuit LowBank 2
  • P0665Intake Manifold Tuning Valve Control Circuit HighBank 2

Checked on · Rafael Soares

These are the generic meanings every manufacturer shares. Each brand adds its own detail, so your car's handbook, its service information and a qualified mechanic have the last word. OdoKeep has no connection with any manufacturer, and the app does not read codes from the car.

Write the code into the car's history

Log the code in OdoKeep as an OBD scan when a scanner or the workshop gives you one, then the repair and what it cost, and keep the maintenance that prevents it on a plan with reminders. The app keeps the record; it does not read the car.

QR code to download OdoKeep on the App Store or Google Play

Point your phone's camera here